01789 774244

Default welcome msg!

Press Releases

LOCTITE® HY 4080The new LOCTITE® HY 4080 GY Universal Structural Bonder is ideal for joining dissimilar materials on products destined for operation in challenging conditions such as extreme temperatures and high vibration.  It is one of a new breed of adhesives that are based on Henkel’s new, patented hybrid technology that combines the most critical attributes of different adhesives – bond strength, durability and speedy fixturing and cure speed.  These are complemented by improved health and safety credentials

Read More
Posted in 0 By Kate Harris

Techsil will be exhibiting at the FAST Exhibition on 21st September 2017 at the Imperial War Museum, Duxford, Cambridgeshire. Come and see us on stand 84!

Read More
Posted in 0 By Kate Harris

Vitralit® UC 6686 is a newly developed light curable epoxy adhesive from manufacturer Panacol. Upon exposure to ultraviolet light, it cures in seconds to form a crystal clear, extremely hard, scratch resistant surface perfect for dome coatings and for decorating glass and plastics.

 

Read More
Posted in 0 By Kate Harris

Airbus QualificationsTechsil is delighted to announce that five of Momentive’s 1 part RTV silicone adhesive sealants have achieved Airbus Industrial Qualification for use in aircraft assembly, maintenance, repair and overhaul.

Read More
Posted in 0 By Kate Harris

Loctite hybrid rangeThe LOCTITE® hybrid products combine the qualities of different adhesives to achieve bond strength, speed and durability providing improved performance on a variety of substrates and the versatility to solve many more design and assembly challenges.

Read More
Posted in 0 By Kate Harris

conformal coatingIn tests, Techsil’s new silicone conformal coating formulations manufactured by Momentive out-perform other conformal coating materials for corrosion prevention, including acrylics, polyurethane, polyolefin and competitor silicone formulations.

Read More
Posted in 0 By Kate Harris

Nordon Performus III DispenserTechsil is delighted to announce an agreement with fluid dispensing systems specialist Nordson EFD. Techsil will become distributors of Nordson EFD’s vast array of high performance application equipment, precision fluid dispensing systems and accessories. The range includes benchtop dispensers through to high performance automated dispensing systems.

Read More
Posted in 0 By Kate Harris

emblem tapeTechsil has developed a range of easily applied adhesive tape solutions used to affix exterior badges, emblems, nameplates, trims and decorative embellishments in place. These tapes meet even the most demanding material attachment and mounting requirements and can be used with a wide variety of OEM paint systems and substrates, including painted surfaces, ABS, polypropylene, stainless steel, aluminium and chromed metals.

Read More
Posted in 0 By Kate Harris

Thermal PasteThe Techsil Team are delighted to  be exhibiting at this year’s Thermal Engineering Show, Derby.  Come and visit us on Stand IR7 on Thursday 27th April, 10am - 4pm. 

Read More
Posted in 0 By Kate Harris

Foam gasketUsing an innovative single-component liquid polyurethane foam sealing system and machine technology Techsil’s gasketing service is the economical and reliable solution for replacing labour intensive peel and stick gasket applications.

Read More
Posted in 0 By Kate Harris

Momentive Flexible Mould Making SiliconesTechsil are pleased to announce 3 new Momentive grades developed for use in flexible moulding applications. They offer excellent transfer of pattern detail along with long mould life and extremely high temperature resistance.

Read More
Posted in 0 By Kate Harris

Potting with structalit 8801 T epoxyTechsil introduces a newly developed potting adhesive Structalit® 8801T, which cures rapidly at low oven temperatures. This innovative epoxy adhesive was specially formulated for temperature-sensitive applications in electronics; and its resistance against oils and fuels makes it  particularly suited for automotive and aerospace applications.

Read More
Posted in 0 By Kate Harris

knottecknottec® is a range of knot-filling hot melt adhesives which allow for the fast and effective repair of not only knot defects, but also deep scratches and other forms of deep wood damage.

Read More
Posted in 0 By Kate Harris

Techsil were delighted to be in the position to help out a group of young people based at QAC Specialist College, Birmingham, when they found themselves in a sticky situation.

Read More
Posted in 0 By Kate Harris

Techsil win awardTechsil were delighted to be chosen as the Adhesives & Sealing Solutions Company of the Year 2016 by Business and Industry Today; a publication which works to promote high quality products and services from reliable and trustworthy companies.

Read More
Posted in 0 By Kate Harris

water-based-adhesives-for-vehicle-interiorsTechsil are pleased to present a new range of high performance, water-based 1 and 2 part adhesives. Specifically engineered to bond: PVC flooring, most plastics, wood, leather and synthetic leather, textiles, cotton fibres and wood fibres. These solvent-free adhesives are ideal for vehicle interiors in applications such as flooring, door panels and inserts, insulation materials and leather/vinyl wrapping. The features of this new range include:

Read More
Posted in 0 By Kate Harris

Glob top epoxy Structalit 8838Formulated specifically for the consumer and general electronics industry, Techsil introduces two new adhesives with a low halogen content from manufacturer Panacol: Vitralit® UD 8050 and Structalit® 8838 provide encapsulation of electronic components on PCBs and allow better flow control and precise dispensing on individual components due to their intrinsic viscosity.

Read More
Posted in 0 By Kate Harris

Panacol - Two rubber substrates bonded with new UV adhesive Vitralit VBB 2N LV show very high bond strengthRubber substrates can be very difficult to bond and there are drawbacks with using traditional adhesive systems. Cyanoacrylates have low impact strength and quickly become brittle and bonding with solvent based adhesives can be hazardous in the workplace. Techsil presents a new flexible, transparent, solvent free UV-adhesive; Vitralit® VBB-2N LV is specially formulated for bonding elastomeric materials. Due to its extremely low viscosity Vitralit® VBB-2N LV is suitable for large area bonding as well as applications where the gap size is very small.

Read More
Posted in 0 By Kate Harris

Clear Electrical PottingMany design engineers working in the Electronics industry are looking for potting and encapsulating products offering brilliant long term clarity, good protection from environmental factors, along with excellent thermal characteristics.  Techsil have launched a range of four new optically clear encapsulants designed to have, in particular, an excellent refractive index and great UV stability.

Read More
Posted in 0 By Kate Harris

Conformal Coating StripperTechsil supply a bespoke range of cleaners and solvents designed for the electronics industry. Here we focus on some exciting new arrivals alongside some of the best sellers from the existing range.  Thanks to our recent distribution agreement with MG Chemicals, Techsil has launched a new range of cleaners and solvents for sensitive electronics components, which helps deliver better performance in applications from flux removal and lubrication to priming and preparation for use with adhesives.

Read More
Posted in 0 By Kate Harris

LED assembly materialsIntroducing some of our new products available for LED assembly, LED potting and thermal management as well as some of the more well established products already widely used in the LED industry.

Read More
Posted in 0 By admin admin

A PU foam or elastomer with flame retardancy is the safest option regardless of your application. Some industries choose fire resistant grades for every element of their build to not only reduce the risk of a fire starting, but also to contain a fire which has broken out nearby.

Read More
Posted in 0 By techsil

Panacol introduces a newly developed light curing acrylate adhesive, which is specially formulated for bonding plastics, metals and glass and is available in three different viscosities - a low viscosity, medium flow and a non-flowing gel.

Read More
Posted in 0 By admin

Using the SLA 3D printing method with UV light curable resins can be a quick, efficient process but often needs additional post-cure to ensure the part reaches its full strength; or for reworking or repair. Techsil supply UV flood lamps, spot curing systems and UV light curing chambers for bench top applications or automated production lines.

Read More
Posted in 0 By admin

Providing specialist materials for electronic design, manufacture and development is a key area of Techsil's expertise, adding soldering equipment is a natural progression; giving customers a broader selection of technical solutions.

Read More
Posted in 0 By techsil

Techsil announces an agreement to supply M.G. Chemicals’ high performance range of adhesives, coatings, sealants, cleaners and soldering supplies. A very popular range tried and tested in North America specifically developed for electronics production and design.

Read More
Posted in 0 By techsil

Effective control of heat is an increasing concern among today's electronic device manufacturers and, as products become more compact, the need to dissipate damaging heat effectively is greater than ever. To address the thermal demands of today's electronic devices, Techsil provides a complete portfolio of high-performance, user-friendly materials to suit a variety of current and future heat control needs.

Read More
Posted in 0 By techsil

Vitralit® UV 4050 MV is medium viscosity UV Adhesive designed primarily for bonding plastics, aimed at medtech applications and medical device assembly.

Read More
Posted in 0 By techsil

Techsil® RTV27941 is a translucent liquid silicone rubber designed with mould making in mind. When mixed this two-part casting resin kit cures at room temperature to a flexible 41 Shore A silicone rubber with a linear shrinkage of just 0.1%.

Read More
Posted in 0 By techsil

Benefit from huge cost savings and increased productivity with Form-in-Place gaskets (FIPG); an all-in-one solution from Techsil. Formulations include silicone liquids and pastes, anaerobic gasket materials and instant UV curing sealants.  Whatever your Gasketing requirement be it environmental sealing, shock absorption, EMI/RFI shielding, acoustic damping, thermal conducting or insulating we have a solution to suit and expertise in automated dispensing options to match your precise gasketing needs.

Read More
Posted in 0 By admin

Techsil introduce new adhesives with improved conductivity to the UK market. Jet dispense compatibility and snap cure make these conductive adhesives the ideal choice for high speed production.

Read More
Posted in 0 By admin

SnapSil TN8000' a one-component silicone adhesive, cures at room temperature forming a resilient flame-retardant rubber. Easy to apply and versatile, it can adhere to many materials such as metals, plastics, glass and ceramics without the use of primers. Insulating and waterproof, it can be considered for use in a wide array of industrial sealing and bonding applications such as electronics, solar and communications devices.

Read More
Posted in 0 By admin