Drone Materials

TA4550 TOUGHENED ACRYLIC	VIEW TDS	PERMABOND® TA4550 is a 2-part, 2:1 low odour, acrylic adhesive. It was developed for structural bonding of nylon/polyamide without the need for any primers or additional surface treatment, such as plasma. TA4550 is also good for bonding plastics, composites and metals. It cures rapidly at room temperature and is thixotropic (nonslump). The adhesive is highly toughened, which makes it suitable for applications involving impact and vibration.
MT3821 HYBRID EPOXY, HIGH IMPACT	VIEW TDS	PERMABOND® MT3821 is a 2:1, two-part, modified epoxy adhesive designed for sealing and bonding. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. When cured, this adhesive is soft and flexible.
ET5428 TOUGHENED EPOXY	VIEW TDS	PERMABOND® ET5428 BLACK is a thixotropic two part adhesive with excellent resistance to impact and vibration. The controlled flow properties as well as its ease of mixing and application, enables the adhesive to be used where gap filling is required. Permabond® ET5428 BLACK has been found to provide exceptional performance even at elevated temperatures. Permabond® ET5428 BLACK has been specifically formulated for use in applications requiring toughness and high strength and shows special benefits in the construction of composite assemblies.
F200 THREADLOCKER	VIEW TDS	Permabond® F200 is an anaerobic adhesive which has been developed to give excellent resistance to peel and impact forces. This toughening, combined with good adhesion to aluminium and copper alloys, makes it the first choice where relatively thin or lightweight components are being bonded which may be subject to “distortion” in service. It is also capable of resisting the thermal stresses that may be generated when bonding dissimilar surfaces. Permabond F200 is also suitable for contact with potable water.
TA439 MAGNET BONDER	VIEW TDS
DP490 2 -PART EPOXY ADHESIVE (carbon fibre)	VIEW TDS	3M’s high-strength structural adhesives are fundamentally load-bearing formulations. Bond strength is often as strong as, or stronger than the materials joined.
UV639 UV CURE ACRYLIC MULTI PURPOSE	VIEW TDS	PERMABOND® UV639 is a UV-curing adhesive developed for use on plastics. It has superb adhesion to acrylic, polycarbonate and PETG. This adhesive can also be used to bond glass, metals and other materials. UV639 cures to give a colourless bond so is ideal for applications where aesthetic appearance is vitally important.
MT3836 2-PART FR/THERMALLY CONDUCTIVE ADHESIVE	VIEW TDS	PERMABOND® MT3836 two-part, modified hybrid silane polymer adhesive designed for sealing and bonding applications. It has excellent adhesion to polycarbonate, ABS, Nylon and other plastics as well as a variety of different metals. The cured adhesive has been designed to meet the fire retardancy requirements of UL94 V-0.
RTV1084 1-PART THERMALLY CONDUCTIVE ADHESIVE SEALANT	VIEW TDS	TECHSIL® RTV1084G is a non-corrosive, 1-part, room temperature vulcanising (RTV) silicone rubber. It is one of a new family of products called acetone cure sealants that are solvent free. It exhibits excellent primerless adhesion to many substrates. The product is cured rapidly in contact with atmospheric moisture to a tough rubber. It does not corrode copper or its alloys and exhibits excellent primerless adhesion when fully cured.
RTV22730 FAST CURE SILICONE SEALANT	VIEW TDS
RTV19131 UV CURE SILICONE	VIEW TDS
1182 COPPER EMI TAPE	VIEW TDS
TA4550 TOUGHENED ACRYLIC	VIEW TDS	PERMABOND® TA4550 is a 2-part, 2:1 low odour, acrylic adhesive. It was developed for structural bonding of nylon/polyamide without the need for any primers or additional surface treatment, such as plasma. TA4550 is also good for bonding plastics, composites and metals. It cures rapidly at room temperature and is thixotropic (nonslump). The adhesive is highly toughened, which makes it suitable for applications involving impact and vibration.