Hylomar® M Non-Setting Gasket 300ml
Hylomar M is a gasketing compound that is non-setting and non-hardening. It is highly engineered, polyester-urethane based and is resistant to a wide range of fluids including industrial fuels, oils, water and brine, and air, turbine and piston engine combustion products.
This product can be used to seal both joint surfaces and threaded parts.
Hylomar M is a gasketing compound that is non-setting and non-hardening. It is highly engineered, polyester-urethane based and is resistant to a wide range of fluids including industrial fuels, oils, water and brine, and air, turbine and piston engine combustion products.
This product can be used to seal both joint surfaces and threaded parts.
Key features:
- Non hardening and non-setting
- Resistant to fuels, oils, coolants and gases
- Specified worldwide by OEMs
- Wide operating temperatures - 50°C to +250°C
- Easy to use
Potential Applications:
- Inlet manifolds
- Timing case covers
- Gearboxes and transmission components
- Thread sealing
- Flat Machined Surfaces
- Water and oil pumps
- Instrument inspection covers
- Cylinder head gasket
- Flat rigid sumps
- Gas turbines
- Water cooled generators and turbo vacuum systems
Typical Properties – Medium Grade
- Film Thickness- 0.03 mm
- Surface Finish Max - 3.0 µm
- Area covered by 80 mls - 1.36 m2
- Product coverage after drying- 4 mg/cm2
- Solvent Content- 42%
- Specific Gravity (ASTM D4659) - 1.035
